|
kimbo
|
 |
« Reply #30 on: December 20, 2008, 09:57:30 AM » |
|
Yes, the height challenges are at the top and bottom of the plan, and the roof doesn't slope all that steeply. It'd be great at some point to extend further - but I'd have to see the impact it has on the workshop/guest sleeping area. The workshop might also be a poor site for tracks, I intend to have a sink there for easy wash-up, a paint-area, a TV, and a PC all present in that area. My original plan was much more ambitious with regards to use of space, but my architect suggested the delineation of space below as offering the best of both worlds for both a guest-space / a proper office / a proper workshop for train-related activities.
|
|
|
|
|
Logged
|
KimLiving in: Brussels, Belgium AnyRail user since: 26/12/2007 Dream layout: HO freelance layout set in an imaginary European country bordering to Belgium, Germany, and Netherlands Personal site: http://kimmetje.rpgnewworlds.net
|
|
|
|
peartree
|
 |
« Reply #31 on: December 21, 2008, 10:16:03 PM » |
|
Kim,
Ok, this plan snippet shows what I had in mind. Just a branch that can be used as an kludged 'branchline'. Since it runs at desktop level, you can work on trains at the bench and use the track to test your work. The trackage shown as 'hidden' by the bed could run through a sort of tunnel-without-a-mountain to keep it (and the bed's occupant) safe from collision.
|
|
|
|
Logged
|
Later, Jeff AnyRail Fanatic
|
|
|
|
kimbo
|
 |
« Reply #32 on: December 21, 2008, 10:29:20 PM » |
|
Looks good, and indeed, if it can work, why not, but as mentioned, I'll have to see physically whether it's possible to have that in that area. The sink and paint areas will be exactly where you suggest placing the tracks and I imagine they don't make good bed-side partners
|
|
|
|
|
Logged
|
KimLiving in: Brussels, Belgium AnyRail user since: 26/12/2007 Dream layout: HO freelance layout set in an imaginary European country bordering to Belgium, Germany, and Netherlands Personal site: http://kimmetje.rpgnewworlds.net
|
|
|
|
peartree
|
 |
« Reply #33 on: December 22, 2008, 03:01:12 PM » |
|
Well, you could certainly extend the single-track portion behind a backsplash  and put the teensy yard a little further along the bench... I'm sure you can fill in the blanks. I model in N, at the moment, so I'd model a small station or run the track into a reversing loop over by the stairs end of the bench. On another subject, I'm a bit surprised that with what seems like perpetual space issues, UK/European layouts don't seem to use multi-deck layouts at all (yes, I do mean connected by a helix loop). They're becoming so common over here that one is hard put to engineer a layout without it. Only people with next to no space at all seem willing to leave them out. As for the paint area, I can't imagine that as a wonderful neighbor for the bed, either 
|
|
|
|
|
Logged
|
Later, Jeff AnyRail Fanatic
|
|
|
|
kimbo
|
 |
« Reply #34 on: December 22, 2008, 03:57:51 PM » |
|
That's a fact, but I don't plan to do any paint-work when guests are over, so hopefully that won't be too big an issue!  I'm likely to buy a proper hobby paint-spray booth as well to ensure good evacuation of toxic fumes. The idea certainly has merit though. It certainly would add an extra dimension to the layout - and I could actually really incorporate it by making that auxiliary line connect to the last train station thereby representing the connection to the rest of the world.
|
|
|
|
|
Logged
|
KimLiving in: Brussels, Belgium AnyRail user since: 26/12/2007 Dream layout: HO freelance layout set in an imaginary European country bordering to Belgium, Germany, and Netherlands Personal site: http://kimmetje.rpgnewworlds.net
|
|
|
|
peartree
|
 |
« Reply #35 on: December 23, 2008, 02:22:22 PM » |
|
Yes indeed! Lots of track plans include what we call 'interchange tracks'. These allow you to not only model a connection to the rest of the world, but to make it a specific link (in this case to a real-world railway somewhere near the area your imaginary road is in). Then you have the perfect reason to include rolling stock and locos of the real road, at least to some extent.
|
|
|
|
|
Logged
|
Later, Jeff AnyRail Fanatic
|
|
|
|
kimbo
|
 |
« Reply #36 on: December 23, 2008, 03:01:31 PM » |
|
One step ahead of you there!  I made images which I posted on my blog cataloguing the country. The layout models the Arnou, Wouterke, Trekken line.  Although I'm going to move Trekken and Adamstadt, so that at least two of my cities are named after people who are making the layout possible! If it proves physically possible, I could make the track the connection to the Netherlands. The area will in any case, enable me to have Belgian, Dutch, French, German, and Luxembourghish rolling stock fairly convincingly, not to mention the once-in-a-while contributions from Switzerland and Italy. 
|
|
|
|
|
Logged
|
KimLiving in: Brussels, Belgium AnyRail user since: 26/12/2007 Dream layout: HO freelance layout set in an imaginary European country bordering to Belgium, Germany, and Netherlands Personal site: http://kimmetje.rpgnewworlds.net
|
|
|
|
peartree
|
 |
« Reply #37 on: December 23, 2008, 09:48:03 PM » |
|
Ah! There you go! Plenty of reasons to have interchange tracks, hidden tracks, staging yards, and all manner of slight-of-hand  Imagine how much more you could have fit in that space with N scale!
|
|
|
|
|
Logged
|
Later, Jeff AnyRail Fanatic
|
|
|
|
kimbo
|
 |
« Reply #38 on: December 23, 2008, 10:38:22 PM » |
|
Heehee! I'd already invested too much in HO to really consider the switch to another scale. It still remains a little too small for my liking in any case. 
|
|
|
|
|
Logged
|
KimLiving in: Brussels, Belgium AnyRail user since: 26/12/2007 Dream layout: HO freelance layout set in an imaginary European country bordering to Belgium, Germany, and Netherlands Personal site: http://kimmetje.rpgnewworlds.net
|
|
|
|
peartree
|
 |
« Reply #39 on: December 23, 2008, 11:35:06 PM » |
|
About the same way I feel about Z scale  . I used to feel the same way, at least until I found myself in a series of apartments without the room to model more than a 2x4 module in HO scale...
|
|
|
|
|
Logged
|
Later, Jeff AnyRail Fanatic
|
|
|
|
kimbo
|
 |
« Reply #40 on: December 24, 2008, 09:38:53 AM » |
|
I am very fortunate in that regard that such a compromise won't be necessary for the foreseeable (touch wood) future!
|
|
|
|
|
Logged
|
KimLiving in: Brussels, Belgium AnyRail user since: 26/12/2007 Dream layout: HO freelance layout set in an imaginary European country bordering to Belgium, Germany, and Netherlands Personal site: http://kimmetje.rpgnewworlds.net
|
|
|
|
kimbo
|
 |
« Reply #41 on: December 24, 2008, 03:28:34 PM » |
|
Time for some updates: I've added a little bit of extra aisle width at the bottom, giving 60cm instead of the original 45cm planned, and also a few of the tracks were over-stretched, so updated for that too!
|
|
|
« Last Edit: December 24, 2008, 03:31:24 PM by kimbo »
|
Logged
|
KimLiving in: Brussels, Belgium AnyRail user since: 26/12/2007 Dream layout: HO freelance layout set in an imaginary European country bordering to Belgium, Germany, and Netherlands Personal site: http://kimmetje.rpgnewworlds.net
|
|
|
|
kimbo
|
 |
« Reply #42 on: December 28, 2009, 06:29:18 PM » |
|
I haven't had much opportunity to use AnyRail or to have the mental space to really concentrate on that. As the renovation works in my house come to an end though, I'm starting to be in a place where I can restart thinking about the train layout. I'll also have a much clearer idea of the space I'm going to have finally - difficult to judge when the room in question is part of a major renovation work. I still have to get some parquet floor put in, and also need to save money to get a custom-made work table with running water and all put in place. Once that's done, I'll start being able to think about buying the parts for a baseboard, the perfect time to sink my teeth back into AnyRail methinks! Thought I'd show you some pics of the space I'm going to be working in... these pictures were taken just when we moved into the new place.    The metal struts are now painted in white, but it gives you a good idea of the space. I'll probablyu as a result of the space need to reconsider the whole layout, but that's what AnyRail is great for, doing and re-doing layouts on a whim.
|
|
|
|
|
Logged
|
KimLiving in: Brussels, Belgium AnyRail user since: 26/12/2007 Dream layout: HO freelance layout set in an imaginary European country bordering to Belgium, Germany, and Netherlands Personal site: http://kimmetje.rpgnewworlds.net
|
|
|
|
peartree
|
 |
« Reply #43 on: December 29, 2009, 09:23:33 PM » |
|
Kimbo, A nice plan (even if you have to 'start over'). But imagine what could be done in N scale with 50+ m2!!! It gets me all excited just thinking about it 
|
|
|
|
|
Logged
|
Later, Jeff AnyRail Fanatic
|
|
|
|
kimbo
|
 |
« Reply #44 on: January 02, 2010, 01:48:21 PM » |
|
Aye, and even more in Z  - but I've already invested enough in HO. Check it out guys, I was in Kerkrade in order to fix a Burger King crave (no Burger Kings in Belgium), and opposite the Burger King was a huge hardware shop Hornbach. In Belgium, parquet flooring tend to be rather expensive, so I thought I'd take a peek to see what the prices were like in the Netherlands. Amazing differences in price, and I found a parquet which I just fell in love with - despite having no car able to take the order away, my partner and I bought on the spot the parquet! Partner and his dad are now busy picking it up as we speak.  Thought I'd share the colour with you! My trains better appreciate the effort being placed to make it a nice space for them! 
|
|
|
|
|
Logged
|
KimLiving in: Brussels, Belgium AnyRail user since: 26/12/2007 Dream layout: HO freelance layout set in an imaginary European country bordering to Belgium, Germany, and Netherlands Personal site: http://kimmetje.rpgnewworlds.net
|
|
|
|