Lines and surfaces tab and menu

This tab is only available when a line or surface, or one of its points is selected. A general explanation is here.

The popup menu is available when you right-click a point or a line.

Point functions

Tab:

Right-click menu:

x	The x coordinate of this point (left to right).
y	The y coordinate of this point (top to bottom).
Move point	Move only this point.
Move surface	Move the whole surface.
Normal corner	The corner defined by the neighboring points.
Round corner	A perfect arc.
Curved corner	An elliptic corner.
Delete point	Delete the current point.
Add point	Add a point close to the current point.
Load image	Load an image to fill the surface.
Remove image	Remove the image that fills the surface.
Width, Height, Angle	Set the size of the image (in your measurement units), and the orientation.
Maintain aspect ratio	Keep the aspect ratio of the original image.
Adjust outline	Recalculates the surface outline so it fits the picture exactly.

Line and surface functions

Tab:

Right-click menu:

Delete	Delete the shape.
Glue	Glue the shape to avoid moving it by accident.
Rotate...	Rotate the shape.
Flip	Mirror the shape.
Layer	Select to move the shape to another layer.
Send to back	Send this shape to the back of all shapes with the same height.
Send backward	Send this shape one step back relative to all shapes with the same height.
Bring to front	Bring this shape on top of all the shapes with the same height.
Bring forward	Bring this shape one step further to the top relative to all shapes with the same height.
Line->Surface and v.v.	Turn the line into a shape and vice versa.
Line width	Set the drawing width of the line.
Height	Set the height of the shape. A shape has one height, it can not be tilted. All shapes are drawn before the track is drawn.
Color	Set the drawing color of the line.
Normal corners	Set all corners to normal.
Round corners	Set all corners to perfect arcs.
Curve corners	Set all corners to elliptical curves.
Load image	Load an image to fill the surface.
Remove image	Remove the image that fills the surface.
Width, Height, Angle	Set the size of the image (in your measurement units), and the orientation.
Maintain aspect ratio	Keep the aspect ratio of the original image.
Adjust outline	Recalculates the surface outline so it fits the picture exactly.
Add point	Add point at cursor
Group	Group selected lines and groups (only available when applicable)
Ungroup	Ungroup this group (only available when applicable)
Description	Description for the group (only available when applicable)

Page url: http://www.anyrail.com/help_en/index.html?lines_and_surfaces_tab.htm