To add a line #

1. Open the Insert tab.

2. Click Add line.

3. Click for each point on the line.

4. Double click to finalize.

TIP: You can also right-click on the work area, and select Add line from the popup menu.

To add a surface #

1. Open the Insert tab.

2. Click Add surface.

3. Click for each corner.

4. Double click to finalize.

TIP: You can also right-click on the work area, and select Add surface from the popup menu.

To add a point to the line or surface #

1. Right-click where you want to add a point.

2. Select Add point.

A new point is added.

TIP: You can add a point by hovering over the line and pressing ‘p’.

To delete a point #

1. Right-click the point.

2. Select Delete point.

TIP: To quickly delete a point, click it and press Delete.

To move a point #

• Simply drag the point to move it.

To position a point #

Sometimes you need to precisely position a point.

1. Click the point to activate it.

2. Enter the precise x and y position.

To create round corners #

You can create round or curved corners for points that have neighboring points. The points at the end of the line cannot be set to round or curved.

• A Round corner is a perfect arc. A part of a circle.

• A Curved corner is a curve halfway to each neighboring point.