AnyRail Model Railroad Forum

General Category => Problems => Topic started by: Zoli on September 01, 2021, 05:53:06 PM

Title: Set height (limitations)
Post by: Zoli on September 01, 2021, 05:53:06 PM
I am planning garden railroad (my area is 16 m long...)

I use set height, I found some limitations:
- height cannot be negative (I would like to use 0 for basic level, bellow this level should be negativ)
- I planned a station about 1.2 m heigher than the lowest items. When I set height over 100 the unit disappear

Is there any way to design heigher than 1 m?

Thanks your help!
Zoltan
Title: Re: Set height (limitations)
Post by: David on September 01, 2021, 07:51:34 PM
Heights can be negative. Just make sure to type a minus sign (-) before the value.

If elements are out of view because of their height, make sure to check the lower and upper limit of the 'Height in view' on the SHOW tab. AnyRail only displays items that are within the set range.

This functionality can be used to create a 'horizontal slice' of your layout.
Title: Re: Set height (limitations)
Post by: Zoli on September 01, 2021, 11:57:42 PM
Thanks David

It is very cool!