News:

Due to heavy spamming attempts on this forum, automatic registration has been disabled. We will approve registration requests as quickly as possible (unless you're a spammer of course :) )

Main Menu

Minor update, Fastrack O60 LH and RH Switches

Started by pjf02536, December 18, 2012, 08:27:00 PM

Previous topic - Next topic

pjf02536

Looks like the extension section is already attached to the switch, and is in the parts (when you insert a new switch, and it shouldn't be if its already attached to the switch)

Problem is you can not make a circle, with switches to escape it cleanly with the extension attached to the switch .....
Is there a way to detach the already (from library) attached section from the switch ?
It's probably preferable to have the switch and the extensions all separate, so they can be assembled as I believe the O70 switches are  (additionally this would also affect the parts list, as there are extra parts, and parts that would not be unaccounted for properly )

David

Do you mean the short extension sections?
They are not attached, and presented with the part as shown here:
http://ecx.images-amazon.com/images/I/51e3O7WGKAL._SL500_AA300_.jpg

It might look different in AnyRail, but if you switch 'Roadbed' on in the 'Home' tab, you can easily see it.

David.
David Hoogvorst. Founder and Owner of DRail Software. Creator of AnyRail.