2D view not refreshed when returning from 3D view

[TodaProduction]

Hi David,

Unfortunately the "Screen refresh going from 3D back to 2D" is not Fix.

Windows 7 Professional + SP1 with 64bit  (using Classic theme)
Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz  16.0GB RAM
Intel(R) HD Graphics 4600  (3840X1200 dot Dual Monitor)

TodaProduction

[David]

Hi Toda,

This one is impossible to reproduce so far.
Does it not work on either monitor? Primary and secondary I mean?

[TodaProduction]

Hi David,

Thank you to move my remarks to a more appropriate category.

When I used the latest AnyRail 6.1.3 (Jun 9 2016),  very interesting result has occurred.

I started the AnyRail in the following three conditions.

(a) Start AnyRail only on the primary monitor
(b) Start AnyRail only on the secondary monitor
(c) Start AnyRail on both the primary and secondary monitor (astride)

Then the results are now as follows.

(a) Screen is not refreshed when I return to 2D mode
(b) Screen has been completely refreshed when I return to 2D mode
(c) Only the upper portion of the secondary monitor is refreshed when I return to 2D mode (see attachment)

Is this a problem with my PC hardware ? The Motherboard of my PC is the ASUS H97-PRO, and I am using the latest drivers of the Intel HD Graphics 4600.

Best regards,

TodaProduction

[TodaProduction]

Hi David,

First of all, thank you for all of the wonderful 2016 year, and thank you again this year.

Today,  I will report to you, the problem that occurred in my dual monitor environment, ie "2D view is not refreshed when returning from the 3D view" was resolved complete in AnyRail version 6.5.0 (Jan 12 2017).

My environment
    Windows 7 Professional + SP1 with 64bit (using classic theme)
    Intel (R) Core (TM) i 5 - 4590 CPU @ 3.30 GHz 16.0 GB RAM
    Intel (R) HD Graphics 4600 (3840 X 1200 dot Dual Monitor)

Test condition
    (a) Start AnyRail only on the primary monitor
    (b) Start AnyRail only on the secondary monitor
    (c) Start AnyRail on both the primary and secondary monitor (astride)

Up to the previous version, the problem has been continued, but with AnyRail version 6.5.0 the screen is refreshed correctly in (a), (b) and (c) , and I was able to continue the operation in the subsequent 2D view.

Thank you very much !!

[David]

Thanks for confirming it's fixed!