News:

Due to heavy spamming attempts on this forum, automatic registration has been disabled. We will approve registration requests as quickly as possible (unless you're a spammer of course :) )

Main Menu

Vertical clearance indicators: very slow and some are missing

Started by Sven, December 16, 2018, 11:06:02 PM

Previous topic - Next topic

Sven

(1) In the recent update 6.20 I noticed that when enabling the vertical clearance indicators AR becomes very sluggish and slow when zooming in or out. This was much much faster in earlier versions (e.g. in 6.11.2). It's now virtually impossible to work with vertical clearance indicators enabled, so I keep enabling and disabling them. Any chance we get the faster speed back?
(2) It seems that at some locations indicators are missing. See enclosed picture where at the orange circles in my opinion there should be a clearance indicator as the clearance here is lower then the 117.6 further down the track. So I cannot be sure now if all relevant low clearances are really shown.

David

David Hoogvorst. Founder and Owner of DRail Software. Creator of AnyRail.

Sven

Hi David, sent it to you via mail. Thanks for your investigations.

Sven

Hi David, thanks for your fixes in 6.20.1.
It works like a charm now :-)
Best wishes and a blessed Christmas time