News:

Due to heavy spamming attempts on this forum, automatic registration has been disabled. We will approve registration requests as quickly as possible (unless you're a spammer of course :) )

Main Menu

Tilting at surfaces

Started by Future-Digital, January 02, 2019, 08:51:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Future-Digital

January 02, 2019, 08:51:06 PM
Hello, David,

Only recently have I made some basic changes in my layout that have made it obvious that it would be nice to be able to put a tilt or slope on a surface.

I have put small ramps (surfaces) in various places on the base that would show the actual construction of the wood framing that would hold up the track. Since the track slopes, it would be nice to have a corresponding slope in the support surface.


When printed out in layers it would help immensely in building the base to match the intended track placement.

Bill
"I find television very educating. Every time somebody turns on the set, I go into the other room and read a book." - Groucho Marx

Sven

#1
January 06, 2019, 01:26:03 PM
Totally agree. Would be great to be able to have different heights/z-coordiantes for each point of a surface.
Print
Go Up Pages1
User actions