News:

Due to heavy spamming attempts on this forum, automatic registration has been disabled. We will approve registration requests as quickly as possible (unless you're a spammer of course :) )

Main Menu

Roco H0 Turntable problem

Started by rosdol, January 01, 2019, 01:30:44 PM

Previous topic - Next topic

rosdol

Hi, I did several layouts now, but on my last I had a problem. I use  H0 Rocoline without trackbeds and wanted to implement a Turntable  42615. Actually there are two versions one with no connectors, the other wit 18 degree connectors. This does not fit with any Lock Sheds on the market which have 15 degrees or less. How can I modify the turntable to have connecting tracks every 15 degrees ??
Thanks and all the best in 2019 !
Erik

David

If I read the documentation, the real turntable comes with spacers so you can connect tracks at any angle of at least 9 degrees.
So that's an omission in AnyRail. There are more turntables with the same free track placement. This is a thing we will need to address at some point in the software.
David Hoogvorst. Founder and Owner of DRail Software. Creator of AnyRail.

rosdol

Hi David, any change in turntable support, especially with variable spacers ??
Thanks
Erik

David

David Hoogvorst. Founder and Owner of DRail Software. Creator of AnyRail.