News

Due to heavy spamming attempts on this forum, automatic registration has been disabled. We will approve registration requests as quickly as possible (unless you're a spammer of course :) )

Topic: Version 6.24  (Read 257 times)

0 Members and 1 Guest are viewing this topic.

Offline David

  • Hero Member
  • *****
  • Administrator
  • Posts: 3734
Version 6.24
« on: May 09, 2019, 02:20:04 pm »
Hello everyone!

In the May release you will find the following new functions:
- Elevate, to elevate (or 'sink') your complete layout, or parts of it, so the heights are correct. Use this function if you started out wrong, or if you decide to add another level to your layout.
- Mass removal of isolators. This only works if no sections are defined on either side of the isolator.
- Mass freeze/unfreeze flex track. Make sure your flex cannot be bent accidentally after this operation.
- H0 Piko track with bedding.
- Showing the current printer in the Print backstage pane.
- The height for rulers can be set now.

We've also updated a few libraries:
- N Kato Unitrack, road crossing added.
- H0 Piko A, codes added, so you can switch between codes (such as G940, G239) and part numbers (such as 55209, 55200).
- H0 RocoLine with roadbed has some new curved turnouts.

Errors and bugs:
- Fixed weird results that sometimes happened when using the Parallel flex function.
- Fixed a crash when entering '0' in the print scale percentage.
- Fixed a drawing issue after importing very old plans containing a ruler.
- Fixed a problem when setting the font for multiple rulers at once.


Have fun!

David.

Offline Future-Digital

  • Hero Member
  • *****
  • Posts: 500
  • Quryosity incarnate. (Yea, I know its misspelled.)
    • Future-Digital International
Re: Version 6.24
« Reply #1 on: May 09, 2019, 11:15:56 pm »
Thank you, David.

I see myself making use of the elevation adjustment in about 5 minutes. Correcting a BUNCH of mistakes that I made years ago and didn't want to spend days correcting just got easy.

Thank you, again.

Bill

Offline Shadyside Southwestern

  • Newbie
  • *
  • Posts: 1
Re: Version 6.24
« Reply #2 on: May 16, 2019, 02:40:39 am »
Wow!! Thanks for elevations! Can 3d structures be next??? - Russ

Offline Future-Digital

  • Hero Member
  • *****
  • Posts: 500
  • Quryosity incarnate. (Yea, I know its misspelled.)
    • Future-Digital International
Re: Version 6.24
« Reply #3 on: May 16, 2019, 09:46:11 pm »
I'll second that desire for 3d structures. Badly needed.

Bill