News:

Due to heavy spamming attempts on this forum, automatic registration has been disabled. We will approve registration requests as quickly as possible (unless you're a spammer of course :) )

Main Menu

Grade Problems

Started by NP2626, November 23, 2020, 02:42:48 PM

Previous topic - Next topic

NP2626

I am in the process of designing an On30 track plan.  I want to include a switch back branch line leaving my Main Line, going through 3 switchbacks at various heights and arriving at the top level of 6 inches above the main.  I set the lower height of -0- inches and go to the top level and pressing the shift key and 6 inches and the track in between the 0 height and 6 inch height does not turn green as in the Tutorial. Also, the Smooth Slope never becomes available.

Obviously I am doing something wrong, can you help?

NP2626

Bob Bryce

I had this problem and it turned out to be tracks that I thought were connected actually were not, even though they looked like they were.  I uncoupled them and re-coupled them and the problem went away.  Might try this.