News:

Due to heavy spamming attempts on this forum, automatic registration has been disabled. We will approve registration requests as quickly as possible (unless you're a spammer of course :) )

Main Menu

crossings

Started by Dale, April 07, 2008, 01:37:57 AM

Previous topic - Next topic

Dale

I've noticed that when i try to identify sections of track that include a crossing (60*), both directions are identified as the same.
is there a way to have one half of the crossing on one section, and the other on a second section (powered independantly)

Please advise

David

Hi Dale,

Indeed, currently a crossing is seen as one electrical entity. I know that in many cases, this is technically not correct. Thanks for pointing that out.
On the other hand, it is often advised not to let trains stop on crossings or turnouts, and to just wire them in such a way that they're always powered.

Especially in the DCC (digital) world, this would be the case anyway.

But you're right, and we added this issue to our todo list for future investigation and development.

Thanks again!

David.
David Hoogvorst. Founder and Owner of DRail Software. Creator of AnyRail.